Network Time Acquiring Protocols Parameter Configuration - Avaya P332GT-ML Installation And Configuration Manual

Network Time Acquiring Protocols Parameter Configuration

The P330 can acquire the time form a Network Time Server. P330 supports the
SNTP Protocol (RFC 958) over UDP port 123 or TIME protocol over UDP port 37.
Use the CLI commands briefly described below for configuring and display time
information and acquiring parameters.
In order to...
Restore the time zone to its default,
UTC.
Configure the time zone for the
system
Configure the time protocol for use
in the system
Enable or disable the time client
Configure the network time server
IP address
Display the current time
Display the time status and
parameters
Display the current time zone offset
Get the time from the time server
Avaya P332GT-ML User's Guide
Chapter 10 Basic Switch Configuration
Use the following command...
clear timezone
set timezone
set time protocol
set time client
set time server
show time
show time parameters
show timezone
get time
51