Setting Recurring Summer Time Hours
Web Agent
Procedure
Document No. 650-100-700, Issue 1
This section provides the following procedures:
Setting Recurring Summer Time Hours
Setting One-Time Summer Time Hours
* Note: If you upgrade your switch from a previous version, the local
time settings are saved as Greenwich Mean Time values.
Always change the Summer Time Hours Algorithm before you
set the clock.
You can set recurring summer time hours using either the Web Agent or the
CLI.
To set recurring Summer Time Hours using the Web Agent:
1. Select System Clock from the System > Configuration group on the Web
Agent. The System Clock dialog box opens
Figure 3-4. System Clock Dialog Box
2. Select Summer Time Hours Algorithm from the Clock Options field.
The Summer Time Hours Configuration dialog box opens
Configuring System Information
(Figure
3-4).
(Figure
3-5).
3-5