Reply To (Specifying A Reply Address) - Fuji Xerox ApeosPort-IV C4430 User Manual

5 Scan
When [PDF] is selected in [File Format]: pdf
When [XPS] is selected in [File Format]: xps
When [DocuWorks] is selected in [File Format]: xdw
To set the file name
1
Select [File Name].
2
Enter a file name using the displayed keyboard.
For information on how to enter characters, refer to "Entering Text" (P.58).
Note

Reply To (Specifying a Reply Address)

When using the E-mail service, you can specify the address for reply.
5
1
Select [Reply To].
2
Enter an address for reply.
Reply To
Select the [Reply To] box to display the keyboard screen on which you can enter an
address for reply.
Clear
Deletes the address entered in [Reply To].
Reply To Me
Uses the address specified in [From] on the [E-mail] screen as a reply address.
Note
284
• When each page is saved as one file, the page number is added to the end of each file
name.
• Up to 128 characters can be entered as a file name for the Scan to PC service.
• When you select [FTP] in [Transfer Protocol] for scanning to PC and the save location is
Macintosh or Unix at the same time, enter a file name with single-byte characters.
• Up to 28 characters can be entered as a file name for the E-mail service.
• Up to 28 characters can be entered as a file name for the Store & Send Link service.
• Up to 40 characters can be entered as a file name for the Network Scanning service.
• [Reply To Me] is selectable only when an address is specified in [From] on the [E-mail]
screen.