Sensor (Hole Punch Box Full, Transmitter) Removal - Lexmark CX825 Service Manual

19
Thread the cable through the hole and out of the frame.
20
Remove the sensor receiver.

Sensor (hole punch box full, transmitter) removal

1
Remove the hole punch box.
2
Remove the MSHPF front left cover. See
3
Remove the MSHPF front door. See
4
Remove the MSHPF door hinge. See
5
Remove the knobs J2 and J7. See
6
Remove the MSHPF inner front cover. See
7
Remove the MSHPF left front cover. See
8
Remove the MSHPF controller board cover. See
9
Remove the MSHPF right cover. See
10
Remove the MSHPF bottom right cover. See
11
Remove the MSHPF rear cover. See
"MSHPF front left cover removal" on page
"MSHPF front door removal" on page
"MSHPF door hinge removal" on page
"Knobs J2 and J7 removal" on page
"MSHPF inner front cover removal" on page
"MSHPF left front cover removal" on page
"MSHPF controller board cover removal" on page
"MSHPF right cover removal" on page
"MSHPF bottom right cover removal" on page
"MSHPF rear cover removal" on page
Repair information
1043
916.
912.
915.
914.
917.
921.
922.
923.
931.
7564
930.