Clutch Release System Inspection
Clutch Release Bearing
Check clutch release bearing for smooth rotation. If
abnormality is found, replace it.
CAUTION
!
Do not wash release bearing. Washing may
cause grease leakage and consequential
bearing damage.
Tightening Torque Specifications
Fastening part
CPP switch lock nut
Clutch operating cylinder bolt
Flywheel bolt
Clutch cover bolt
Release lever bolt
NOTE
The specified tightening torque is also described in the following.
"Clutch Fluid Pipe and Hose Components"
"Clutch Pedal and Clutch Pedal Bracket Components"
"Clutch Cover, Clutch Disc and Flywheel Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
Clutch Release Shaft
S7RS0B5306017
Check clutch release shaft and its pin for deflection or
damage.
If abnormality is found, replace it.
I3RM0A530020-01
Specifications
Tightening torque
N⋅m
kgf-m
7.5
23
70
23
23
lb-ft
0.75
5.5
2.3
17.0
7.0
51.0
2.3
17.0
2.3
17.0
Clutch:
5C-13
I3RM0A530021-01
S7RS0B5307001
Note