Suzuki Swift Sport 2004 Service & Repair Manual page 1146

8B-108 Air Bag System:
4) Remove side curtain-air bag (inflator) module fixing
bolts (1) and clips (2).
2
2
1
5) Remove side curtain-air bag (inflator) module.
WARNING
!
• When carrying a live air bag (inflator)
module, make sure the bag opening is
pointed away from you.
Never carry air bag (inflator) module by
wires or connector on the side of the
module. In case of an accidental
deployment, the bag will then deploy with
minimal chance of injury.
• As the live curtain air bag (inflator) module
must be kept with its bag facing up while
being stored or left standing. This is
necessary so that a free space is provided
to allow the air bag to expand in the
unlikely event of accidental deployment.
• Observe "Precautions on Handling and
Storage of Air Bag System Components"
for handling and storing it.
Otherwise, personal injury may result.
2
2
1
I4RS0A820076-01
Installation
WARNING
!
Do not install side curtain-air bag (inflator)
module while twisted or bended. Otherwise,
side curtain-air bag (inflator) module may not
deploy and injury may result.
1) Install side curtain-air bag (inflator) module (1) with
clips and new bolts.
2) Tighten side curtain-air bag (inflator) module
attaching bolts (1) to specified torque.
Tightening torque
Side curtain-air bag (inflator) module attaching
bolts (a): 11 N·m (1.1 kgf-m, 8.0 lb-ft)
1,(a)
3) Connect side curtain-air bag (inflator) module
connector (1) securely as shown in figure.
a) Connect connector.
b) Lock connector with lock button (2).
1
4) Install head lining referring to "Head Lining Removal
and Installation in Section 9H".
5) Enable air bag system. Refer to "Enabling Air Bag
System".
1,(a)
I4RS0A820110-01
b)
2
a)
I4RS0A820055-01