Dtc B1363 / B1367: Driver / Passenger Side Curtain-Air Bag Initiator Circuit Short To Ground - Suzuki Swift Sport 2004 Service & Repair Manual

8B-88 Air Bag System:
Step
2 1) With ignition switch OFF, disconnect SDM connector
"L29".
2) Check proper connection to SDM at terminals "L29-19"
and "L29-20" or "L29-21" and "L29-22".
3) If OK, release shorting bar in SDM connector inserting
release tool (1) included in special tool (A).
4) Measure resistance between "L29-19" and "L29-20"
terminals (for DTC B1362) or "L29-21" and "L29-22"
terminals (for DTC B1366) with connected special tools
(A), (B) and (C).
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
"L29-19" "L29-20""L29-21""L29-22"
Ω
Is resistance 1.8
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear DTCs referring to "DTC Clearance", if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.

DTC B1363 / B1367: Driver / Passenger Side Curtain-Air Bag Initiator Circuit Short to Ground

Wiring Diagram
1
2
[A]
[A]: Shorting bar
1. From main fuse
2. Ignition switch
Action
(A)
"L18", "L41"
STEERING WHEEL
or more?
4
GRN
"G32"
3
8
3. "A/BAG" fuse
4. Junction block assembly
5. SDM
Substitute a known-
good SDM and recheck.
(C)
(A)
(B)
I7RS0A820033-02
5 "L29"
"L04"
L29-20
RED DC+
L29-27 IG
DC- L29-19
BLK
PC+ L29-21
L29-28 E1
PC- L29-22
"L29"
6. Driver side curtain-air bag (inflator) module
7. Passenger side curtain-air bag (inflator) module
8. Ground for air bag system
Yes
DTC B1362: Repair
short from "YEL/GRN"
wire circuit to "YEL/
BLU" wire circuit or from
"YEL/GRN" or "YEL/
BLU" wire circuit to
other wire circuit.
DTC B1366: Repair
short from "BLK/YEL"
wire circuit to "BRN/
YEL" wire circuit or from
"BLK/YEL" or "BRN/
YEL" wire circuit to
other wire circuit.
"L18"
YEL/GRN
6
YEL/BLU
BLK/YEL
7
BRN/YEL
"L41"
No
S7RS0B8204045
I7RS0A820031-04