Instrument Panel Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

Instrument Panel Removal and Installation

WARNING
!
Refer to "Air Bag Warning in Section 00"
before starting service work.
Removal
1) Disconnect negative (–) cable at battery.
2) Disable air bag system referring to "Disabling Air
Bag System in Section 8B".
3) Remove steering column hole cover (1).
4) Turn steering wheel to remove steering column
cover screws (3).
5) Remove steering column covers (2).
2
1
6) Remove glove box (1).
7) Remove hood latch release lever (2).
1
8) Remove console box referring to "Console Box
Components in Section 9H".
9) Remove instrument panel center lower bracket (1).
S7RS0B9306015
3
I4RS0B920004-02
2
I4RS0B930008-01
1
I4RS0B930009-01
Instrumentation / Driver Info. / Horn:
10) Remove front pillar trims (1) and dash side trims (2).
1
"A"
2
11) Remove instrument panel mounting screws (1).
12) Detach instrument panel from steering support
member (2) and then remove foot duct (3).
3
1
13) Disconnect instrument panel harness connectors,
heater control cables and antenna cable for
instrument panel removal.
14) Remove steering column mounting nuts referring to
"Steering Column Removal and Installation in
Section 6B".
15) Remove instrument panel ground wire.
16) Remove instrument panel mounting bolts (1).
17) Remove instrument panel (2) with steering support
member (3) and instrument panel harness.
1
9C-18
"A"
I4RS0B930010-01
2
1
I4RS0B930011-01
1
3
2
I4RS0B930012-01