Windshield Wiper Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

Windshield Wiper Removal and Installation

Removal
1) Disconnect negative (–) cable at battery.
2) Remove wiper pivot caps (1) and wiper arm nuts (2),
and remove windshield wiper arms with wiper blades
(3).
3
3) Remove cowl top garnish referring to "Cowl Top
Components in Section 9K".
4) Disconnect coupler from windshield wiper motor.
5) Remove bolts (1), and remove windshield wiper
assembly (2).
S7RS0B9406004
1
3
2
I4RS0B940003-03
I5RS0C940007-01
Installation
1) Install windshield wiper assembly (1), and tighten
bolts to specified torque.
Tightening torque
Windshield wiper bolt (a): 8 N·m (0.8 kgf-m, 6.0
lb-ft)
2) Connect coupler to windshield wiper motor.
3) Install cowl top garnish referring to "Cowl Top
Components in Section 9K".
4) Install windshield wiper arms with wiper blades (1) to
specified position as shown in figure, and then
tighten windshield wiper nuts to specified torque.
Tightening torque
Windshield wiper arm nut (a): 16 N·m (1.6 kgf-
m, 11.5 lb-ft)
5) Install wiper pivot caps (2) to windshield wiper arm
nuts.
2
1
3. Ceramic line
4. Wiper blade center
6) Connect negative (–) cable to battery.
Wipers / Washers:
I5RS0C940008-01
3
4
2
3
1
(a)
I4RS0B940004-03
9D-4