Front Seat Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

9G-2 Seats:

Front Seat Removal and Installation

WARNING
!
Refer to "Air Bag Warning in Section 00" before starting service work.
Removal
1) Disable air bag system referring to "Disabling Air Bag System in Section 8B".
2) Disconnect couplers for seat harness and side air bag, if equipped.
3) Remove 4 mounting bolts to remove seat assembly.
4) Disassemble and repair seat if necessary.
Installation
Reverse removal procedure to install front seat.
• If necessary tighten seat back and seat cushion, after tighten seat back mounting bolt (1) by hand, tighten
completely as shown according to the alphabetical order.
• In the case of installing seat assembly to the body, insert seat adjuster pin in the location hole of the body. After seat
mounting bolt (2) is tightened by the hand, tighten completely as shown according to the alphabetical order.
• Apply thread lock cement to seat mounting bolts and riser bolts.
: Thread lock cement 99000–32100 (Thread Lock Cement 1305)
or
: Thread lock cement 99000–32030 (Thread Lock Cement Super 1303B)
• Torque to specifications as shown in "Front Seat Components".
• Enable air bag system referring to "Enabling Air Bag System in Section 8B".
1, d
1, b
2, a
2, b
2, a
2, b
1, a
1, c
I6RS0C970002-01
S7RS0B9706002