8A-3 Seat Belts:
Front Seat Belt Components
WARNING
!
• Never attempt to disassemble or repair the seat belt pretensioner (retractor assembly). If any
abnormality is found, be sure to replace it with new one as an assembly.
• Be sure to read "Precautions on Service and Diagnosis of Seat Belt" before starting to work and
observe every precaution during work. Neglecting them may result in personal injury or
unactivation of the seat belt pretensioner when necessary.
7
(a)
8
10
9
1. Upper anchor
2. Lower anchor
3. Retractor assembly
4. Buckle
5. Yellow connector (for seat belt pretensioner)
Repair Instructions
6
(a)
2
(a)
4
6. Shoulder adjuster mounting bolt
: Tighten upper bolt first, then tighten lower bolt.
7. Anchor bolt
: Tighten upper bolt first, then tighten lower bolt.
8. Cushion
9. Spacer
10. Washer
1
7
2
3
(b)
3
(a)
7
(a)
12
10
2
9
11
a)
b)
5
11. Spring washer
12. Wave washer
: 43 N⋅m (4.3 kgf-m, 31.5 lb-ft)
: 5.5 N⋅m (0.55 kgf-m, 4.0 lb-ft)
S7RS0B8106001
I6RS0C810001-01