Headlight Switch (In Lighting Switch) Removal And Installation; Headlight Switch (In Lighting Switch) Inspection; Hazard Warning Switch Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

9B-8 Lighting Systems:
Headlight Switch (in Lighting Switch) Removal
and Installation
Removal
1) Disconnect negative cable at battery.
2) Remove steering column hole cover (1).
3) Remove steering column covers (2).
Turn steering wheel to access steering column cover
screws (3).
2
1
4) Remove lighting switch (2) from combination switch
assembly (1) and disconnect its coupler (3).
2
Installation
Reverse removal procedure for installation.
Headlight Switch (in Lighting Switch)
Inspection
Check for continuity between terminals at each switch
position. If check result is not as specified, replace
switch.
S7RS0B9206004
3
I4RS0B920004-02
1
3
I4RS0B920005-01
S7RS0B9206005
[A]
5 4 3 2 1
Terminal
5
Shaft condition
LOW
OFF
PASS
HI
LOW
CLEARANCE
PASS
HI
LOW
HEAD PASS
HI
[A]: LH steering vehicle
Hazard Warning Switch Removal and
Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Remove center ventilation louver (1) referring to
"Center Ventilation Louver Removal and Installation
in Section 7A".
3) Disconnect coupler, and then remove hazard
warning switch (2) from center ventilation louver (1)
while releasing the locks (3).
1
2
3
Installation
Reverse removal procedure for installation.
HI
HEAD
CLEARANCE
OFF
PASS
[B]
1 2 3 4 5
3 1 2 4
I5RS0D920004-02
[B]: RH steering vehicle
S7RS0B9206006
I4RS0B920007-01