Dtc B1084 / B1094: Driver / Passenger Side-Sensor Circuit Short To Power Circuit Or Open - Suzuki Swift Sport 2004 Service & Repair Manual

DTC Troubleshooting
Step
1 1) Disconnect side-sensor connector "L11" or "L35".
2) Disconnect SDM connector "L29".
3) Check proper connection to SDM connector at terminals
"L29-46" and "L29-47" or terminals "L29-44" and "L29-
45".
4) Measure resistance between "L29-46 terminal and body
ground, "L29-47" terminal and body ground, or "L29-44"
terminal and body ground, "L29-45" terminal and body
ground.
Special tool
(A): 09932–76010
Is each measured resistance infinity?
2 1) Check side-sensor referring to "Side-Sensor Inspection".
Is it in good condition?
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components and ensure all components are properly mounted.
• Clear DTCs referring to "DTC Clearance", if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.

DTC B1084 / B1094: Driver / Passenger Side-Sensor Circuit Short to Power Circuit or Open

Wiring Diagram
1
2
1. From main fuse
2. Ignition switch
3. "A/BAG" fuse
Action
"L29-44" "L29-45""L29-46""L29-47"
(A)
"L04"
4
GRN
"G32"
3
BLK
8
4. Junction block assembly
5. SDM
6. Driver side-sensor
Go to Step 3.
I7RS0A820037-01
Substitute a known-
good SDM and recheck.
5
"L29"
RED
SD+ L29-46
L29-27 IG
SD- L29-47
SP+ L29-45
L29-28 E1
SP- L29-44
"L29"
7. Passenger side-sensor
8. Ground for air bag system
Air Bag System:
Yes
DTC B1083: "WHT/
RED" circuit or "LT
GRN/BLK" circuit
shorted to ground.
DTC B1093: "WHT/
GRN" circuit or "LT
GRN" circuit shorted to
ground.
Replace side-sensor
referring to "Side-
Sensor Removal and
Installation". If DTC still
exists, substitute a
known-good SDM and
recheck.
"L11"
WHT/RED
6
LT GRN/BLK
WHT/GRN
7
LT GRN
"L35"
8B-81
No
S7RS0B8204041
I7RS0A820028-02