Rear End Door Window Components; Rear End Door Glass Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

9E-13 Glass / Windows / Mirrors:

Rear End Door Window Components

Rear End Door Glass Removal and Installation

Refer to "Windshield Removal and Installation" as
removal and installation procedures are basically the
same. However, note the following.
• Observe the following precautions when applying
adhesive (1) along glass (2) edge.
• Adhesive (1) should be applied evenly especially in
height.
• Be careful not to damage primer (3).
• With the position of fastener (4) properly aligned,
install glass (2) on rear end door panel (5).
• Press glass against body quickly after adhesive (1) is
applied.
Adhesive amount specifications and position for
rear end door glass
Height "a": 13 mm (0.51 in.)
Width "b": 6 mm (0.24 in.)
Width "c": 14 mm (0.55 in.)
Position "d": 12 mm (0.47 in.) for glass upper
section
Position "d": 16 mm (0.63 in.) for glass bottom
section
Position "d": 32.5 mm (1.28 in.) for glass side
sections
1. Rear end door glass
S7RS0B9506011
2. Fastener
"A"
"A"
2 1
"A"
"d"
"c"
"a"
3
1
"b"
S7RS0B9506010
I4RS0A950025-01
1
2 2
5
"A"
4
2
4
1
5
2
I4RS0A950026-01