Rear Speaker Removal And Installation; Horn Removal And Installation; Horn Inspection; Horn Relay Inspection - Suzuki Swift Sport 2004 Service & Repair Manual

Rear Speaker Removal and Installation

Removal
1) Remove rear door trim referring to Step 1) to 3) of
"Rear Door Glass Removal and Installation in
Section 9E".
2) Remove 3 rear speaker mounting screws (1).
3) Remove rear speaker (2) from rear door panel (3).
4) Disconnect rear speaker coupler from rear speaker
(2).
2
Installation
Reverse removal procedure.

Horn Removal and Installation

Removal
1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to "Front Bumper
and Rear Bumper Components in Section 9K".
3) Disconnect horn connector (1).
4) Remove horn (2).
Installation
Reverse removal procedure.
S7RS0B9306019
1
3
I4RS0A930027-01
S7RS0B9306020
2
1
I4RS0A930028-01
Instrumentation / Driver Info. / Horn:

Horn Inspection

1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to "Front Bumper
and Rear Bumper Components in Section 9K".
3) Disconnect horn connector (1).
4) Connect battery positive (+) terminal to horn
connector (2) and negative (–) terminal to body
ground.
If horn is not sounding, replace horn.

Horn Relay Inspection

1) Disconnect negative (–) cable at battery.
2) Remove junction block assembly referring to "BCM
(Included in Junction Block Assembly) Removal and
Installation in Section 10B".
3) Remove horn relay (1) from junction block assembly
(2).
4) Check that there is no continuity between terminal
"c" and "d". If there is continuity, replace relay.
5) Check that there is continuity between terminals "c"
and "d" when a 12 V battery is connected to
terminals "a" and "b". If malfunction is found, replace
it with a new one.
b a
c
d
9C-20
S7RS0B9306021
2
1
I4RS0A930030-01
S7RS0B9306022
1
2
I4RS0B930018-01
c
d
a
b
I3JA01920006-01