No
Function
Parallel Broadcasting
0
0: Disabled
1: Enabled
Priority setting for the G3 line.
1
0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
2-7
Not used
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
No
Function
0-5
Not used
Extended scanner page
memory after memory option is
6
installed
0: Disabled
1: Enabled
Special Original mode
7*
0: Disabled
1: Enabled
SM
System Switch 16 (SP No. 1-101-023)
1: The machine sends messages
simultaneously using all available ports during
broadcasting.
NOTE: If a customer wants to keep a line
available for fax reception or other reasons,
select "0" (Disable).
This function allows the user to select the
default G3 line type. The optional SG3 units are
required to use the PSTN-2 or 3 setting.
Do not change these settings.
System Switch 19 (SP No. 1-101-026)
Do not change the settings.
0: After installing the memory expansion option,
the scanner page memory is extended to 4 MB
from 2 MB.
1: If this bit is set to 1 after installing the
memory expansion option, the scanner page
memory is extended to 12 MB. But the SAF
memory decreases to 18 MB.
1: If the customer frequently wishes to transmit
a form or letterhead which has a colored or
printed background, change this bit to "1".
"Original 1" and "Original 2" can be selected in
addition to the "Text", "Text/Photo" and "Photo"
modes.
Comments
Comments
105
D163