Ricoh D146 Service Manual page 1880

No Function
0 Not used
Going into the Energy Saver
mode automatically
1
0: Enabled
1: Disabled
2-3 Not used
Interval for preventing the
machine from entering Energy
Saver mode if there is a pending
transmission file.
Bit 5 Bit 4
4-5
0 0
0 1
1 0
1 1
6-7 Not used
D163
System Switch 15 (SP No. 1-101-022)
Do not change the settings.
1: The machine will restart from the Energy
Saver mode quickly, because the +5V power
supply is active even in the Energy Saver
mode. The LED of the operation switch is
flashing instead of entering Energy Saver
mode.
Use this setting if an external telephone has to
be used when the machine is in the Energy
Saver mode.
Do not change these settings.
If there is a file waiting for transmission, the
machine does not go to Energy Saver mode
Setting
during the selected period.
After transmitting the file, if there is no file
1 min
waiting for transmission, the machine goes to
30 min
the Energy Saver mode.
1 hour
24 hours
Do not change
Comments
104 SM