Scan Defaults - Fuji Xerox ApeosPort-IV C5575 Administration Manual

Select a column by choosing from [Feature in 1st Column] to [Feature in 4th Column]. And
set the item to be displayed from [Not Selected], [Color Scanning], [2 Sided Scanning],
[Original Type], [File Format], [Resolution], [Lighten / Darken], [Reduce / Enlarge], [Mixed
Size Originals], and [Original Orientation].
Reduce/Enlarge - Buttons 2 to 5
This item can be set when [Reduce/Enlarge] is selected in [1st Tab - Features Allocation].
Select the magnification ratio displayed in [Reduce/Enlarge] from the Reduce/Enlarge
Presets registered.
For information about the Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.235).

Scan Defaults

You can set the default settings of the Scan services. When the machine is turned on, or the
machine exits the Energy Saver mode, or when the <Clear All> button is pressed, the
machine resets to the default values set here. Setting frequently used features and values
as the defaults can avoid extra operations required during the use of the machine.
The values set here become valid after the machine turned off and then on.
For more information on each setting item, refer to "5 Scan" in the User Guide.
Color Scanning
Set the default value for [Color Scanning] in the First Tab.
Original Type
Set the default value for [Original Type] in the First Tab.
File Format
Set the default value for [File Format] in the First Tab.
Optimize PDF For Quick Web View
Set the default value for [Optimize For Quick Web View] of [File Format] in the First Tab.
Thumbnail - Outgoing E-mail
For the E-mail feature, set the default value for [Add Thumbnail] when [DocuWorks] or [XPS]
is selected for [File Format] in the First Tab.
Note
Thumbnail - Scan to PC
For the Scan to PC feature, set the default value for [Add Thumbnail] when [DocuWorks] or
[XPS] in selected for [File Format] in the First Tab.
Note
Lighten/Darken
Set the default value for [Lighten/Darken] of [Image Options] in the [Advanced Settings]
screen.
Contrast
Set the default value for [Contrast] of [Image Enhancement] in the [Advanced Settings]
screen. The contrast setting is valid when [Color Scanning] is set to [Color] or [Grayscale].
• XPS stands for XML Paper Specification.
• XPS stands for XML Paper Specification.
Scan Service Settings
5
231