Secure Watermark - Fuji Xerox ApeosPort-IV C5575 Administration Manual

unchangeable. The user ID, the machine ID, and the date and time will be printed as
watermark.
Note
Force Watermark - Client Print
Specify whether to force printing watermark on every document printed from a computer.
To apply the Watermark settings of the machine, select [Allow Device Settings to Override].
To apply the settings specified from an application such as TrustMarkingBasic (sold
separately) or a print server, select [Allow Client Settings to Override]. When [Allow Device
Settings to Override] is selected, the user ID, the machine ID, and the date and time will be
printed as watermark.
Note
Force Watermark - Print Stored File
Specify whether to force printing watermark on every document printed from a folder on the
machine. The user ID, the machine ID, and the date and time will be printed as watermark.
Note
Force Watermark - Media Print
Specify whether to force printing watermark on a Media Print job.
The user ID, the machine ID, and the date and time will be printed as watermark.
Note
Custom Watermark 1 to 3
You can register 3 custom watermarks of up to 32 single-byte characters. The registered
custom watermarks will be specifiable for [Default Watermark].
For information about how to enter characters, refer to "Entering Text" (P.36).
Print this Sample List
Prints samples of watermarks with different background contrasts, which is useful for
selecting the contrast level for [Watermark/Background Contrast].

Secure Watermark

You can set whether or not to detect embedded digital codes in the document. When you
select this feature enabled, the machine forcibly cancels printing when it scans the
document with the protection code embedded.
Important • When [On] is selected, a document without a restriction code may be selected as a document with a
Note
• You can authorize a user to temporarily cancel the Force Watermark settings. For more information,
refer to "User Roles and Authorization Groups" (P.404).
• This setting is common to both Watermark and Secure Watermark.
• You can authorize a user to temporarily cancel the Force Watermark settings. For more information,
refer to "User Roles and Authorization Groups" (P.404).
• You can authorize a user to temporarily cancel the Force Watermark settings. For more information,
refer to "User Roles and Authorization Groups" (P.404).
restriction code. If you have this problems a lot, you can change the setting of the authentication
group in which the user belong to a mode that stops scanning and allows you to select whether to
continue scanning when a restriction code is detected. The System Administrator always uses the
machine in this mode. For more information about the setting of authorization group, refer to
"Authentication" (P.404).
• Copy protection using the Secure Watermark feature is not guaranteed to always operate properly.
The feature may not operate properly depending on a document or conditions. For more
information, contact our Customer Support Center.
• Please note that Fuji Xerox is not liable for any damages caused by the use or without the use of the
Secure Watermark feature.
• An optional component is required to use this feature. For more information, contact our Customer
Support Center.
Common Service Settings
163
5