Connectivity & Network Setup; Port Settings - Fuji Xerox ApeosPort-IV C5575 Administration Manual

5 Tools
Connectivity & Network Setup
In [Connectivity & Network Setup], you can configure settings related to the Connectivity &
Network feature.
For information on Connectivity and Network Settings, refer to "Printer Environment Settings" (P.317) or "E-mail
Environment Settings" (P.335).
If you use CentreWare Internet Services, more detailed settings are possible. For more information, refer to "CentreWare
Internet Services Settings" (P.309).
The following shows the reference section for each setting.
5
1
On the [Tools] screen, select [Connectivity & Network Setup].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.126).
2
Select an item to set or change.

Port Settings

Set the interface of the machine connected to a client. In [Port Settings], you can configure
the following settings.
Important • For LDP, Port9100, HTTP-SSL/TLS, and SIP, do not use a number that is the same as a port number of
For information on HTTP-SSL/TLS port, refer to "HTTP - SSL/TLS Port Number" (P.217).
USB
Port Status
Select [Enabled] to use a USB interface.
Print Mode
Select the printer language use on the machine. Selecting [Auto] enables the machine to
automatically determine and use the most suitable language to print data received from
the host device.
196
Port Settings.................................................................................................................................................................................. 196
Protocol Settings.......................................................................................................................................................................... 201
Machine's E-mail Address/Host Name................................................................................................................................... 204
Proxy Server Settings (ApeosPort Series Models Only)....................................................................................................... 205
EP Proxy Server Setup ................................................................................................................................................................. 206
SIP Settings ................................................................................................................................................................................... 207
T.38 Settings................................................................................................................................................................................. 210
Outgoing/Incoming E-mail Settings ....................................................................................................................................... 210
Remote Authentication/Directory Service ............................................................................................................................. 212
Security Settings .......................................................................................................................................................................... 217
Other Settings............................................................................................................................................................................... 222
another port.
For a port that uses HTTP (IPP, Internet Service (HTTP), UPnP Discovery, SOAP, WebDAV, and Web
Services on Devices (WSD)), do not use a number that is the same as a port number of LPD,
Port9100, and HTTP-SSL/TLS.
Furthermore, if any of the above are set to one of the port numbers indicated below, operation may
no longer be performed properly depending on the setting conditions of the port:
25, 139, 427, 445, 631, 15000