Scan Defaults; Scan To Network; File Format - Fuji Xerox DocuPrint M218 fw User Manual

• Paper Error
Purpose:
To specify whether to display an error when the specified output paper size does not match the loaded
paper.
IMPORTANT:
• Printing repeatedly on the paper smaller than the specified output paper size may make the interior of your
printer dirty, which may result in poor print quality or breakdown in your printer.
Values:
Off*
On

Scan Defaults

Use the Scan Defaults menus to configure a variety of scanner features.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.

• Scan to Network

Purpose:
To store the scanned image on a network server or on a computer.
Values:
Computer(Net)*
Server(FTP)

• File Format

Purpose:
To specify the file format to save the scanned image.
Values:
PDF*
TIFF
JPEG
• Color
Purpose:
To set the color mode.
Values:
Black & White
Grayscale
Does not display an error when the specified output paper size does
not match the loaded paper.
Displays an error when the specified output paper size does not
match the loaded paper.
Stores the scanned image on a computer using the Server Message
Block (SMB) protocol.
Stores the scanned image on a server using the FTP protocol.
Scans in black and white mode. This is available only when File
Format is set to PDF or TIFF.
Scans in grayscale mode.
Using the Operator Panel Menus and Keypad 358