Assigning Services To The Custom Buttons - Fuji Xerox ApeosPort-IV C5575 Administration Manual

6
Select the position where you want to assign an
additional feature.
Note
7
Select a service you want to display on the
[Services Home] screen.
Note
8
Select [Save].
9
Select [Save].

Assigning Services to the Custom Buttons

You can assign services to the <Copy>, <(Not in Use)>, and <Review> buttons on the control
panel.
Assigning a service to a custom button allows you to switch to this service without having to
return to the [Services Home] screen. If you do not need to assign any service to a custom
button, select [(Not Set)].
[Copy] is assigned to the <Copy> button and [Review] is assigned to the <Review> button by
factory default, while the <(Not in Use)> button has no assignment.
This section describes how to assign [Send from Folder] to the <(Not in Use)> button, as an
example.
Note
1
Press the <Log In/Out> button.
• The layout of buttons in this screen is
corresponding to the layout of those on the
[Services Home] screen.
• Select [ ] to display the previous screen or
[ ] to display the next screen.
• You cannot assign the same feature to more
than one button.
• After you change the assignment, apply the labels provided with the machine. When you assign a
service for which no label is provided, use a blank label and write down the service name with a
permanent marker. The labels include the services that are not supported by the machine.
Customizing the Control Panel
<Log In/Out> button
1
33