Paper Jams In Tray 4 (When Tandem Tray Module Is Installed); Paper Jams In Tray 5 - Fuji Xerox ApeosPort-IV C5575 Administration Manual

Paper Jams in Tray 4 (When Tandem Tray Module is Installed)

The following describes how to clear paper jams occurring in Tray 4 when the Tandem Tray
Module is installed.
1
Pull out Tray 4.
Important • If you pull out a paper tray without checking
2
Remove the jammed paper.
Note
3
If paper is jammed in the paper feed section,
open the inner cover and gently remove the
paper.
4
Push the tray in gently until it stops.

Paper Jams in Tray 5

The following describes how to clear paper jams occurring in Tray 5.
1
Check the back of Tray 5 (around the paper
feed entrance) and remove the jammed paper.
Important • When two or more sheets of paper are
Note
2
When two or more sheets of paper were loaded, jog the paper you removed making sure
that all four corners are neatly aligned.
the paper jam location, the jammed paper
may be torn and the pieces may remain
inside the machine. This may cause machine
malfunctions; therefore, always check where
the paper jam occurred first.
• If the paper is torn, make sure no piece of
paper remains inside the machine.
loaded, remove all of the sheets from the
tray.
• If the paper is torn, make sure no piece of
paper remains inside the machine.
Paper Jams
15
577