Paper Tray Settings - Fuji Xerox ApeosPort-IV C5575 Administration Manual

5 Tools

Paper Tray Settings

You can name the Custom Paper Type 1-5, which can be specified for [Paper Type], and the
Custom Paper Color 1-5, which can be specified for [Paper Color] under [Paper Tray
Attributes].
Custom Paper Name/Color
You can name Custom Paper Types 1 to 5 which you can select in [Paper Type] and Custom
Paper Colors 1 to 5 which you can select in [Paper Color] of [Paper Tray Attributes].
You can use letters, numerals, and symbols of up to 24 characters for each name and color.
For example, you can use a name showing its usage, such as "Color" for colored paper, and
"Covers" for bond paper.
For information about how to enter characters, refer to "Entering Text" (P.36).
Paper Tray Attributes
You can set the size and type of paper loaded in trays.
For more information, refer to "Changing the Paper Settings" (P.60).
Change Settings
Select this button, if you change the paper size for the tray or the setting of auto paper
selection.
When you load non-standard size paper in a tray, select [Custom Size], and specify the width
5
and length. When you load standard size paper in a tray, select [Auto Detect].
Important • Align the paper guides against the paper to prevent paper jams or errors. If the machine cannot
Paper Type
Select the type of paper to load in the trays.
Paper Size
When using Trays 1 to 4, you can load both standard size paper and non-standard size
paper. When you load non-standard size paper, select [Custom Size], and then set the size
in the X (width) direction and in the Y (length) direction. For Tray 1, set the size in X (width)
direction between 182 and 432 mm and the Y (length) direction between 140 and 297
mm in 1 mm increments. For Trays 2 to 4, set the X (width) direction between 182 to 457
mm and the Y (length) direction between 140 to 320 mm in 1 mm increments.
For Trays 3 and 4 when the Tandem Tray Module is installed, and Tray 6 (HCF B1), only
the standard size paper can be loaded. Select [Auto Detect].
Paper Color
Set the color of paper. The paper color select here is displayed as the paper color on the
[Paper Supply] screen.
Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto
Paper selection is enabled. Select from [All Colors], [Color], or [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is
automatically selected by the machine for copying or printing.
152
detect a tray, use Tray 5.
For information about paper types available on the machine, refer to "Loadable Quantity and Weight for Supported
Paper" (P.38).