Evaporator Core 1B-34 - Pontiac Fiero 1988 Service Manual

18-34 ASR CONDITIONING
1 - TUBB & HOSE ASSEMBLY (INLET)
2 - TUBE ASSEMBLY - A/C EVAPORATOR OUTLET
3 - TUBE ASSEMBLY - A/C EVAPORATOR INLET
4 - CLIP TUBE ASSEMBLY
5 - BOLT/TUBE ASSEMBLY CLIP
6 - TUBE ASSEMBLY (OUTLET)
7 - BOLT (PIPE ASSEMBLY)
8- FRONT COMPARTMENT PAN SEAL
9- BOLT
Figure 34 A/C Tube Assembly At Front Compartment
Tighten
Torque to 24 Nnn (17 ft. lbs.).
7.
9
10
11
12
Compressor outlet tube at compressor hose
assembly.
\^X\ Tighten
Torque to 24 Nnn (17 ft. lbs.).
Spare tire storage panel.
Jack assembly.
Spare tire assembly.
Negative ( - ) battery cable.
Evacuate and charge system.
EVAPORATOR CORE
I
4
"*!
Remove or Disconnect
1. Discharge system.
V I E W A
V I E W B
1 — CLAMPS
2 — ACCUMULATOR ASM.
3 — FRONT COMPARTMENT PANEL SEAL
4 — PIPE ASM. (HEATER)
5 — HOSE — OUTLET (HEATER)
6 — HOSE — INLET (HEATER)
7 — LOW SIDE FITTING
8 — CYCLING PRESSURE SWITCH
9 — TUBE & HOSE ASM. (INLET)
10 — TUBE ASM. — A/C EVAPORATOR (INLET)
11 — INSTALLED ANGLE 14° — 15°
12 — 41 N-m (30 LBS. FT)
13 — 17 N-m (13 LBS. FT.)
H 2 0 0 7 5 - 1 B
Figure 35 A/C Tube and Heater Hose Assemblies at
Module