Configuring Ip Alias; Figure 24 Static Dhcp; Table 19 Static Dhcp - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyWALL's static DHCP settings, click LAN, then the Static DHCP tab. The
screen appears as shown (some of the screen's blank rows are not shown).

Figure 24 Static DHCP

The following table describes the labels in this screen.

Table 19 Static DHCP

LABEL
#
MAC Address
IP Address
Apply
Reset

4.7 Configuring IP Alias

IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The ZyWALL supports three logical LAN interfaces via its single
physical Ethernet interface with the ZyWALL itself as the gateway for each LAN network.
94
DESCRIPTION
This is the index number of the static IP table entry (row).
Type the MAC address (with colons) of a computer on your LAN.
Type the IP address that you want to assign to the computer on your LAN.
The IP address can be in the same subnet as the LAN IP address or the LAN IP
alias 1 or 2.
Alternatively, click the right mouse button to copy and/or paste the IP address.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 4 LAN Screens