Table of Contents
Advertisement
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
Rem IP Addr= N/A
Rem Subnet Mask= N/A
My WAN Addr= N/A
Network Address Translation= SUA Only
Metric= 1
Private= No
RIP Direction= Both
Multicast=
Field Settings:
Multicast
Select IGMP-v1 for IGMP version 1 or IGMP-v2 for IGMP version 2.
Using Prestige traffic redirect
What is Traffic Redirect ?
Traffic redirect forwards WAN traffic to a backup gateway when the Prestige cannot connect to the Internet
through its normal gateway. Thus this allows your backup gateway to work as an auxiliary backup for the WAN
connection. Once the WAN connection is down, the Prestige forwards the outgoing traffic through the backup
gateway configured in the traffic redirect settings.
How to set up the backup gateway?
Set up the backup gateway device on the Prestige's LAN or WAN. If you want to install the backup gateway
on the WAN, make sure the Prestige is using a static (fixed) IP address. The following figure shows an example.
If you are not given a static WAN IP address, set the backup gateway on the LAN.
Version= RIP-2B
IGMP-v2
Enter here to CONFIRM or ESC to CANCEL:
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2302RL Support Notes
86
Advertisement
Table of Contents
