Replacing The Tray 2 Separation Roller Assy - Konica Minolta bizhub C203 Service Manual

Field Service Ver. 1.0 Jul. 2007
3.5.8

Replacing the tray 2 separation roller assy

A. Periodically replacing parts/cycle
• Tray 2 separation roller assy: Every 300,000 prints
B. Procedure
1. Slide out the tray 2.
2. Open the vertical transport door.
[2] [3]
[1]
[1]
[2] [3]
[2]
[1]
6. To reinstall, reverse the order of removal.
[2]
A02EF2C017DA
[5]
[4] [1]
A02EF2C013DA
A02EF2C014DA
3. Periodical check
3. Opening the jam clearing cover [1],
remove two screws [2], and remove
the tray 2 separation roller assy [3].
4. Remove two C-clips [1], the shaft [2],
spring [3], and cover [4].
Remove the separation roller fixing
plate assy [5].
5. Remove two C-clips [1], and remove
the tray 2 separation roller assy [2].
31