Konica Minolta bizhub C203 Service Manual page 438

Field Service Ver. 1.0 Jul. 2007
Setting/ 8. Using the "get" command, transfer the data for capture to PC.
Procedure
9. Finish the command prompt.
NOTE
• After receiving capture data, select [Administrator Settings] → [Security Set-
tings] → [Security Details], and select [Restrict] for print data capture in order
to delete the job data stored in the hard disk.
When HDD Format or Overwrite Temporary Data is performed, job data is
deleted.
10.9.11 Split Line Detect. Setting
A. Prior Detection
Functions • To set the detection level for the pre-detection of stain on the ADF original glass.
Use • Use when changing the setting for whether or not to detect the stain on the ADF orig-
inal glass when opening/closing ADF as well as its detection level as the main/sub
power being ON, recovering from the sleep/low power mode, etc.
Not Set
Low
Normal
High
NOTE
• Be aware that selecting "Not Set" and performing the pre-detection with the
following setting will display "NG."
[Service Mode] → [Machine] → [Thin Line Prior Detection]
• When "Not Set" is selected, the original glass cleaning operation after the job
ends does not operate.
Setting/ • The default setting is "Normal."
Procedure
: Detection of stain on the glass will not be conducted.
: Stain on the glass will not be detected easily.
: Normal level detection.
: Stain on the glass will easily be detected.
Not Set Low
10. Service Mode
4037F3E542DA
"Normal" High
393