Konica Minolta bizhub C203 Service Manual page 272

Field Service Ver. 1.0 Jul. 2007
(4) Enter Power Save Mode
Functions • To set whether to immediately switch to the power save mode after printing in case of
receiving the fax during power save mode.
Use • To immediately switch to the power save mode after printing in case of receiving the
fax during power save mode.
Normal
Immediately : Switches to the power save mode immediately after the printing.
Setting/ • The default setting is "Normal."
Procedure
B. Output Settings
(1) Print/Fax Output Settings
Functions • To set the timing for printing for the PC print job or fax received.
Use Batch Print : Starts printing when all data are received
Page Print : Starts printing every time data for each page are received
Setting/ <Printer>
Procedure • The default setting is Page Print.
<Fax>
• The default setting is Batch Print.
NOTE
• [FAX] will be displayed only when the optional fax kit (FK-502) is mounted.
(2) Output Tray Settings
<When the FS-519 is mounted>
Functions • To set the priority output tray for each application (Copy print, Printer, Fax and Print
Reports).
Use • To change the prior output tray according to the application.
Setting/ • The default settings are as follows.
Procedure Copy
Print
Report Output
Fax
<When the JS-505 is mounted>
Functions • To set the priority output tray for each application (Copy print, Printer, Fax and Print
Reports).
Use • To change the prior output tray according to the application.
Setting/ • The default settings are as follows.
Procedure Copy
Print
Report Output
Fax
: Switches to the power save mode according to the normal power
save mode after the printing.
"Normal"
: Tray 1 (Tray 3: When [Bin Setting] is enabled.)
: Tray 1
: Tray 2 (Tray 3: When the optional OT-602 is mounted./When
[Bin Setting] is enabled.)
: Tray 2 (Tray 3: When the optional OT-602 is mounted./When
[Bin Setting] is enabled.)
: Tray 1
: Tray 2
: Tray 1
: Tray 2
8. Utility Mode
Immediately
227