Konica Minolta bizhub C203 Service Manual page 342

Field Service Ver. 1.0 Jul. 2007
(5) PING Confirmation
Functions • To set the TCP/IP network diagnosis by PING.
Use • To check the condition of TCP/IP network.
Setting/ 1. Touch [Host Address] for PING transmission.
Procedure 2. Select [Input Host Name], [IPv4 Address Input], or [IPv6 Address Input] and enter a
host address.
3. Touch [Check Connection] key to check the connection.
(6) SLP Setting
Functions
• To set whether to use SLP or not.
Device search will be available with TWAIN by setting SLP enable.
Use
Setting/ • The default setting is Enable.
Procedure
(7) LPD Setting
Functions
• To set whether to use LPD during printing or not.
Use
Setting/ • The default setting is Enable.
Procedure
(8) Prefix/Suffix Setting
<ON/OFF Setting>
Functions • To set whether to add prefix or suffix to the address when calling or entering an
address.
Use • To add prefix or suffix to the address.
Setting/ • The default setting is OFF.
Procedure
<Prefix/Suffix Setting>
Functions • To register or change the prefix or suffix.
• Eight types of prefix and suffix can be added.
Prefix: Letters added to the top of the text (header part)
Suffix: Letters added to the bottom of the text (footer part)
Use • To register or change the address displayed for prefix or suffix.
Setting/ • Available number to be registered as prefix is up to 20 characters.
Procedure • Available number to be registered as suffix is up to 64 characters.
(9) Action for Invalid Certificate
Functions
• To set how to process the job when SSL certificate becomes invalid.
Use
Setting/ • The default setting is Continue.
Procedure
"Enable"
"Enable"
ON
"Continue"
8. Utility Mode
Disable
Disable
"OFF"
Delete the Job
297