Finisher Operations; Entering Finisher Check; Finisher Check Modes - Konica Minolta bizhub C203 Service Manual

5. Finisher operations

5. Finisher operations
5.1

Entering Finisher Check

1. Call the Service Mode to the screen.
See P.330 of the main body service manual.
2. Touch [Finisher].
3. Touch [CB-FN adjustment].
4. Touch [Finisher Check].
5. Touch [Bin SL Drive].
5.2

Finisher Check modes

A. Mail bin solenoid drive mode
• Bin entrance switching solenoids 1, 2 and 3 switch, in order, at the predetermined times.
→ Bin entrance switching solenoid 1 (SD1) activates for the predetermined time.
⎯ Bin entrance switching solenoid 2 (SD2) activates for the predetermined time.
→ Bin entrance switching solenoid 3 (SD3) activates for the predetermined time.
→ All bin entrance switching solenoids deactivate.
→ The operation is finished.
10
Field Service Ver. 1.0 Jul. 2007
4510F3E516DA