Konica Minolta bizhub C203 Service Manual page 177

6. Other
[1]
[1]
132
[2]
A02EF2C129DA
A02EF2C130DA
A02EF2C131DA
Field Service Ver. 1.0 Jul. 2007
6. Remove two screws [1] each, and
remove the imaging unit roll assy [2]
of each color.
7. Remove all the connectors and the
flat cables on the PH relay board.
8. Remove the stopper [1] of the PH
unit.
NOTE
• When removing the stopper, use
care so that both ends of the stop-
per will not open but stay parallel as
shown on the left.
Keep using the stopper after once
stretched out may cause uneven
pitch or other image troubles.