Konica Minolta bizhub C203 Service Manual page 156

Field Service Ver. 1.0 Jul. 2007
[1]
[1]
[2]
6. Perform the following setting.
[Service Mode] → [ADF] → [Read Pos Adj]
See P.30 of the DF-611 service manual.
[2]
A00JF2C422DA
A00JF2C424DA
21.0 mm
[2]
[1]
A00JF2C425DA
2. Tighten the scanner assy [2] with the
two screws [1] temporarily.
3. Move the scanner assy [1] and the
mirror unit to the end of the right.
4. Slide the mirror unit until it hits the
end of the IR right frame.
5. Provide the length of 21.0 mm
between the end of the left indenta-
tion [1] on the scanner assy upper
surface and the end of the IR right
frame upper surface. When the
length is ensured, tighten the two
screws [2].
6. Other
111