Konica Minolta bizhub C203 Service Manual page 216

Field Service Ver. 1.0 Jul. 2007
[2]
B
[1]
A00JF2C552DA
[1]
A00JF2C553DA
[1]
A
A00JF2C547DA
3. Twist the B side scanner drive cable
around the pulley [1] starting from
the rear groove in clockwise direction
five times.
NOTE
• Make sure that no part of the cable
rides on the other.
4. Apply the tape to fix the scanner
drive cable to the pulley [1].
<Rear>
5. Set the round bead [1] of the scan-
ner drive cable (black) to the pulley
[2] at the position as shown in the
illustration.
NOTE
• Make sure that the bead snugly
rests in the slit in the pulley.
6. Other
171