Konica Minolta bizhub C203 Service Manual page 466

Field Service Ver. 1.0 Jul. 2007
B. Connect Proxy
Functions • To set whether or not to connect via proxy server when accessing the server.
Use • To use when accessing the server via proxy server.
Setting/ • The default setting is OFF.
Procedure
C. Proxy Server
Functions • To set the address and the port number for the proxy server.
Use • To use when accessing the server via proxy server.
Setting/ <Server Address>
Procedure • Enter an address using IPv4, IPv6, or FQDN format.
<Port Number>
• Enter the value between 1 and 65535 using the 10-key pad.
(The default setting is 80)
D. Proxy Authentication
Functions • To set the login name or password when authentication is necessary for accessing
the proxy server.
Use • To use when authentication is necessary for accessing the proxy server.
Setting/ <Authentication>
Procedure • The default setting is OFF.
<Log-in Name>
• Enter the login name (up to 32 one-byte characters) on the on-screen keyboard.
<Password>
• Enter the password (up to 32 one-byte characters) on the on-screen keyboard.
E. Connection Time-Out
Functions • To set the time for the timeout for accessing the server.
Use • To use when changing the time for the timeout for accessing the server.
Setting/ • The default setting is 60 sec.
Procedure
10.17.3 FTP Setting
• It will be displayed only when [Internet ISW Set] is set to "ON".
A. Data Input Setting
Functions • To set whether or not to enable downloading using FTP protocol.
Use • To use when accessing the server with FTP protocol.
• Setting this to "ON" will enable the proxy server setting.
Setting/ • The default setting is ON.
Procedure
ON
ON
30 to 300 sec.
"ON"
10. Service Mode
"OFF"
"OFF"
OFF
421