Konica Minolta bizhub C203 Service Manual page 310

Field Service Ver. 1.0 Jul. 2007
(4) DNS Domain
Functions • To set whether or not to enable the auto obtaining for the DNS domain name.
• To set the DNS default domain name.
• To set the DNS search domain name.
Use • To enter the DNS default domain name.
• To enter the DNS search domain name.
Setting/ <DNS Domain Name Auto Retrieval>
Procedure • The default setting is Enable.
NOTE
• "Enable" cannot be set when [IP Settings] is set to "Auto Input."
<Domain Name>
1. Touch [Default DNS Domain Name] or [DNS Search Domain Name 1 to 3].
2. Enter the domain name using the keyboard on the screen and touch [OK].
(5) DNS Server Settings
Functions • To set whether or not to enable the auto obtaining of the DNS server address.
• To set the priority/substitute DNS server.
Use • To enter priority/substitute DNS server.
Setting/ <DNS Server Auto Obtain>
Procedure • The default setting is Enable.
NOTE
• "Enable" cannot be set when [IP Settings] is set to "Auto Input."
<Priority/substitute DNS server.>
• Touch the corresponding key, and input the server address by IPv4 or the IPv6 for-
mat.
(6) RAW Port Number
Functions • To set the RAW port number.
Use • To set the RAW port number for the printer.
• Several data can be accepted at the same time by selecting several ports.
Setting/ 1. Select the necessary port number.
Procedure 2. When using the selected port, press the Clear key to clear the value, and enter the
RAW port number using the 10-key pad.
3. Touch [OK].
"Enable"
"Enable"
8. Utility Mode
No Limit
No Limit
265