Paper Feed Tray 2 Lift-Up Motor (M9) - Konica Minolta bizhub C203 Service Manual

Field Service Ver. 1.0 Jul. 2007
6.3.63

Paper feed tray 2 lift-up motor (M9)

1. Remove the tray 1.
See P.94
2. Remove the tray 2.
See P.94
3. Remove the right front cover/2.
See P.84
4. Remove the lower rear cover/1 and the lower rear cover/2.
See P.92
5. Remove the protective shield/1 and the protective shield/2.
See the steps 1 to 5 of printer control board removing procedure.
See P.135
[1]
[1]
[2]
A02EF2C182DA
[1]
A02EF2C543DA
10. Remove three screws [1], and
remove the paper feed tray 1 lift-up
motor [2].
6. Disconnect two connectors (CN7,
CN8) [1] on the printer control board
6. Other
157