Banner Printing - Konica Minolta bizhub C203 Service Manual

Field Service Ver. 1.0 Jul. 2007
I. Image Log Transfer Settings
• It will be displayed when the following setting shows that switch No.63 is set to [01] at
HEX assignment.
[Service Mode] → [System 2] → [Software Switch Setting]
Functions • Specifies whether to transfer the input or output image data to FTP server using
Scan To FTP whenever MFP inputs or outputs image data.
Makes the settings of the FTP server where image data are transferred.
Use • Use this settings to keep logs of input and output image data for security purpose.
Setting/ • The each default setting is No.
Procedure
• When selecting [Yes], make the settings of the FTP server where data are trans-
ferred.
• Set the following item.
Host Name, File Path, User Name, Password, Port Number, PASV, and Proxy.
NOTE
• When [Yes] is selected, a person who is registered as User cannot use Scan To
FTP function.
J. Driver Password Encryption Setting
Functions • To set whether to use the factory default encryption word or user-defined one as a
common key that encrypts a password used for a print job.
Use
User-Defined
Use Factory Default : Uses the factory default encryption word (Undisclosed pre-
NOTE
• When selecting [User-Defined], set an encryption key being consisted of the
same letters in the printer driver. If the encryption word set in the main body
differs from the encryption key set in the printer driver, different encrypted
passwords are created and printing cannot be made.
• The use of OpenAPI allows an encryption key to be obtained from the main
body.
Setting/ • The default setting is Use Factory Default.
Procedure
8.7

Banner Printing

Functions • To shift to the banner printing mode.
Use • To use when printing on the long size paper.
Setting/ 1. Set the long size paper to the bypass tray.
Procedure 2. Touch [Banner Printing], and touch [ON].
3. Send the job for the long paper print.
4. Touch [Finish] to finish banner printing mode.
NOTE
• Only PC print is available for the long paper print.
• Normal job cannot be accepted during banner printing mode.
Yes
: Sets an encryption word. Enter an encryption word of 20 let-
ters.
defined encryption key).
User-Defined
8. Utility Mode
"No"
"Use Factory Default"
327