Konica Minolta bizhub C203 Service Manual page 431

10. Service Mode
10.8.12 Machine State LED Setting
Functions • To set how to display main body statuses on the machine state LED (state display
lamp, paper empty lamp).
Use
• Each of Type1 and Type2 has the following LED display forms.
Warning statuses
Amount of paper
remaining
(Tray 1 and 2)
Amount of paper
remaining
(Tray 3 and 4, LCT)
Setting/ • Each default setting is Type1.
Procedure
386
Machine State LED Setting
Attention
• Toner supply door open
• Improper toner cartridge placement
Near life
Alert code
Trouble isolation
Fatal error
• Trouble code
• Jam
• Door opened
• Life stop
100 % to 66 % of paper remaining
Near empty
Empty
Being lifted up
Door opened or closed
100 % to 33 % paper remaining
33 % to near empty
Near empty
Empty
Being lifted up
Door opened or closed
"Type 1"
Field Service Ver. 1.0 Jul. 2007
Type1
Blinking Blinking
Blinking
Unlit
Blinking Blinking
Lit
Unlit
Blinking
Lit
Unlit
Unlit
Blinking
Blinking
Lit
Unlit
Type 2
Type2
Unlit
Unlit
Lit
Unlit
Unlit
Lit
Unlit
Unlit
Unlit
Unlit
Lit
Unlit