Fusing Retraction Motor (M12) - Konica Minolta bizhub C203 Service Manual

Field Service Ver. 1.0 Jul. 2007
[2]
[4] [3]
6.3.61

Fusing retraction motor (M12)

1. Remove the paper exit rear cover.
See P.87
2. Remove the protective shield/1 and the protective shield/2.
See the steps 1 to 5 of printer control board removing procedure.
See P.135
[2]
[1]
[2]
[5]
[1]
A02EF2C176DA
[3]
[2]
A02EF2C536DA
[1]
[2]
A02EF2C178DA
6. Disconnect the connector [1].
7. Remove two screws [2], and remove
the switchback motor [3].
NOTE
• Care should be taken to avoid let-
ting the lever [4] hit the housing
and be damaged.
• Care should be taken to prevent the
harness wires [5] from being pulled
loose or pulled out of the connec-
tor.
3. Disconnect the connector [1].
4. Remove three screws [2], and
remove the fusing retraction motor
assy [3].
5. Remove two screws [1], and remove
the fusing retraction motor [2].
6. Other
155