Konica Minolta bizhub C203 Service Manual page 353

8. Utility Mode
(3) Sequential TX Report
Functions • To set whether to print out the sequential TX report or not.
Use • To print out the sequential TX report.
Setting/ • The default setting is ON.
Procedure
(4) Timer Reservation TX Report
Functions • To set whether to print out the reservation TX or not.
Use • To print out the reservation TX.
Setting/ • The default setting is ON.
Procedure
(5) Confidential RX Report
Functions • To set whether to print out the confidential RX report.
Use • To print out the confidential RX report.
Setting/ • The default setting is ON.
Procedure
(6) Bulletin TX Report
Functions • To set whether to print out the bulletin TX report or not.
Use • To print out the bulletin TX report.
Setting/ • The default setting is ON.
Procedure
(7) Relay TX Result Report
• It will be displayed when the following setting is set to "ON."
[Service Mode] → [FAX] → [System] → [Display Setting] → [Relay]
Functions • To set whether to print out the Relay TX Result Report or not.
Use • To print out the relay TX result report after the relay delivery is completed when the
machine is used as the relay delivery station.
Setting/ • The default setting is ON.
Procedure
(8) Relay Request Report
• It will be displayed when the following setting is set to "ON."
[Service Mode] → [FAX] → [System] → [Display Setting] → [Relay]
Functions • To set whether to print out the Relay Request RX Report or not.
Use • To print out the Relay request RX report during relay request RX when the machine
is used as the relay delivery station.
Setting/ • The default setting is ON.
Procedure
308
"ON"
"ON"
"ON"
"ON"
"ON"
"ON"
Field Service Ver. 1.0 Jul. 2007
OFF
OFF
OFF
OFF
OFF
OFF