Konica Minolta bizhub C203 Service Manual page 906

Field Service Ver. 1.0 Jul. 2007
C. Tray Up
• The elevator tray is raised to bin 1. (Bin 1 → Additional bin → Bin 2)
→ The exit opens.
→ The shutter closes.
→ The paper output tray is raised to bin 1.
→ The shutter opens.
→ The exit closes.
→ The operation is finished.
D. Tray Down
• The elevator tray is lowered from bin 1. (Bin 2 → Additional bin → Bin 1)
→ The exit opens.
→ The shutter closes.
→ The paper output tray is lowered from bin 1.
→ The shutter opens.
→ The exit closes.
→ The operation is finished.
E. Punch Drive Standard Holes (appears only when the punch kit PK-515 is
installed)
• The punch is driven once at a standard hole.
→ The operation is finished.
F. Punch Drive MC 2Holes (appears only when the punch kit PK-515 is installed)
• The punch is driven once at a 2holes.
→ The operation is finished.
G. Outlet Open & Close
• Opens and closes the exit.
→ The exit opens.
→ Stops after the predetermined time.
→ The exit closes.
→ The operation is finished.
H. Fold Drive (appears only when the saddle kit SD-505 is installed)
See P.29 of the SD-505 service manual.
I. Saddle Outlet Open & Close (appears only when the saddle kit SD-505 is
installed)
See P.29 of the SD-505 service manual.
J. Conveyance Drive (appears only when the saddle kit SD-505 is installed)
See P.29 of the SD-505 service manual.
K. Shutter Drive
• Opens and closes the shutter.
→ The exit opens.
→ The shutter closes.
→ Stops after the predetermined time.
→ The shutter opens.
→ The exit closes.
→ The operation is finished.
L. Bin SL Drive (appears only when the mail bin kit MT-502 is installed)
See P.10 of the MT-502 service manual.
6. Finisher operations
63