Konica Minolta bizhub C203 Service Manual page 852

Field Service Ver. 1.0 Jul. 2007
[1]
[1] [1]
A01GF2C557DA
[1]
[2]
A01GF2C558DA
2. Periodical check
6. Secure the paddle holder assy by
tightening two screws [1].
NOTE
• When tightening the two set
screws, lightly press the paddle so
that it is fixed without any tilt.
• For proper set screw tightening to
fix the paddle, turn each set screw
only one quarter (1/4) of a turn after
the set screw tip has reached the
shaft.
NOTE
• After reinstalling the paddle holder
assy, check to make sure that the
collar [2] remains still when you are
turning the gear [1].
9