8. Utility Mode
<Connection Timeout>
Functions
• To set the timeout period for connection in transmitting e-mail to SMTP server.
Use
• To change the timeout period for connection in transmitting e-mail to SMTP server.
Setting/
• Select the timeout period using [+] / [-] keys.
Procedure
• The default setting is 60 sec.
<Server Capacity>
Functions
• To set the Max. capacity per mail which SMTP server can receive.
Use
• To change the Max. capacity per mail which SMTP server can receive.
Setting/
• The default setting is No Limit.
Procedure
<SSL Setting>
Functions
• To set whether or not to use SSL when sending an e-mail.
Use
• To use when sending an e-mail using SSL.
Setting/
• The default setting is OFF.
Procedure
<Port No.>
Functions
• To set the port number for transmission with SMTP server.
Use
• To enter the port number for transmission with SMTP server.
Setting/
1. Touch [Input].
Procedure
2. Press the Clear key.
3. Enter the port number between 1 and 65535 using the 10-key pad.
<Port Number (SSL)>
Functions
• To set the port number when using SSL.
Use
• To use for entering the port number when using SSL.
Setting/
1. Touch [Input].
Procedure
2. Touch the Clear key.
3. Enter the port number (SSL) between 1 and 65535 using the 10-key pad.
<Detail Settings: SMTP Authentication>
Functions
• To set whether or not to enable SMTP authentication.
Use
• To use when conducting SMTP authentication.
Setting/
• The default setting is OFF.
Procedure
• When set to "ON", enter the [User ID], [Password] and [Domain Name].
282
"60 sec." (30 to 300, in 30 sec. increments)
"No Limit" (1 to 100)
SMTP over SSL
ON
Field Service Ver. 1.0 Jul. 2007
Start TLS
"OFF"
"OFF"