Konica Minolta bizhub C203 Service Manual page 363

8. Utility Mode
(3) Confidential Document Access Method
Functions • To display the status of the authentication system on the control panel for the confi-
dential document access.
Use • It cannot be changed at the operator's option since it will automatically be set accord-
ing to the [Prohibit Functions When Auth. Error] setting.
• It will be set to [Mode 1] when [Prohibit Functions When Auth. Error] is set to
[Mode 1].
It will be set to [Mode 2] when [Prohibit Functions when Auth. Error] is set to
[Mode 2].
Mode 1 : This mode is for authentication by confidential document ID and pass-
Mode 2 : This mode is for authentication by confidential document ID. It displays
NOTE
• [Mode1] cannot be selected when the following setting is set to "ON."
[Administrator Settings] → [Security Setting] → [Enhanced Security Mode]
Setting/ • The default setting is Mode 1.
Procedure
(4) Manual Destination Input
Functions • To set whether to allow or prohibit to manually enter the destination address on the
Destination Input screen.
Use • To prohibit entering the destination address manually.
Setting/ • The default setting is Allow.
Procedure
(5) Print Data Capture
Functions • To set whether to allow or restrict capturing the print job data.
• To be used when carrying out [Service Mode] → [System 2] → [Data capture].
Use
Setting/ • The default setting is Allow.
Procedure
NOTE
• [Allow] cannot be selected when the following setting is set to "ON."
[Administrator Settings] → [Security Setting] → [Enhanced Security Mode]
318
word. It displays the list of the corresponding confidential document to
print them.
the list of the corresponding confidential document, and print them with
authentication by password.
"Mode 1"
"Allow"
"Allow"
Field Service Ver. 1.0 Jul. 2007
Mode 2
Restrict
Restrict