Konica Minolta bizhub C203 Service Manual page 352

Field Service Ver. 1.0 Jul. 2007
(7) TSI User Box Setting
• It will not be displayed when [Forward TX Setting], [Memory RX] or [PC-Fax RX Setting]
is set to "ON."
Functions • To set whether to use TSI distribution or not.
• To set setting method when there is no matched box at receiving.
Use • To use TSI distribution.
• To change setting method when there is no matched box at receiving.
Automatically Print
Memory RX Use Box : To store the received data in the forced memory receiving
Setting/ <TSI User Box Setting>
Procedure • The default setting is No.
• Press [TSI User Box Registration] and register the distribution.
<Non-matched Box Setting>
• The default setting is Automatically Print.
F. PBX Connection Setting
Functions • To set whether to use PBX connection setting or not.
Use • This will be used when the machine is connected to PBX line.
Setting/ • The default setting is No.
Procedure
• When set to [Yes], enter the external number between 0 and 9999.
G. Report Settings
(1) Activity Report
• It will not be displayed when the following setting shows that vendor or authentication
device is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions • To set whether to print out the activity report or not, and also the timing for printing.
Use • To print out the activity report.
Setting/ • The default setting is ON.
Procedure
• When this setting is set to ON, make the setting of Output Setting.
• The default setting is Every 100 Comm.
(2) TX Result Report
Functions • To set whether to print out the TX report, and also the timing for printing.
Use • To print out the TX report.
Setting/ • The default setting is If TX Fails.
Procedure
: To print the received data.
box.
Yes
"Automatically Print"
"ON"
Daily "Every 100 Comm."
ON "If TX Fails"
8. Utility Mode
"No"
Memory RX User Box
OFF
100/ Daily
OFF
307