Konica Minolta bizhub C203 Service Manual page 563

16. Malfunction code
16.5.62 C6102: Drive system home sensor malfunction
16.5.63 C6103: Slider over running
Scanner home sensor (PS201)
Scanner motor (M201)
Step
Correct or change the scanner drive
1
(cable, pulley, gear, belt) if it is faulty.
Correct the scanner motor set screw if
2
loose.
Adjust [Image Position Leading Edge] and
3
[Feed Direction Adjustment].
Check the PS201, M201, REYB/SCAN and
4 IPB connector for proper connection and
correct as necessary.
5 PS201 I/O check, sensor check
6 M201 operation check
7 Change REYB/SCAN.
8 Change IPB.
16.5.64 C6301: Optical cooling fan motor's failure to turn
Optical cooling fan motor (FM201)
Step
Check the FM201 connector for proper
1
connection and correct as necessary.
Check the fan for possible overload and
2
correct as necessary.
3 FM201 operation check
4 Change REYB/SCAN
5 Change IPB
518
Relevant parts
Action
Relevant parts
Action
Field Service Ver. 1.0 Jul. 2007
Scanner relay board (REYB/SCAN)
Image processing board (IPB)
WIRING DIAGRAM
Control signal
—
—
—
—
IPB CN11IPB-3 (ON)
REYB/SCAN
CN5REYB/SCAN-4 to 7
—
—
Scanner relay board (REYB/SCAN)
Image processing board (IPB)
WIRING DIAGRAM
Control signal
—
—
REYB/SCAN
CN2REYB/SCAN-3 (LOCK)
—
—
Location (Electri-
cal component)
—
—
—
—
V-8
S-11
—
—
Location (Electri-
cal component)
—
—
S-11
—
—