Field Service Ver. 2.5 Jul. 2006
6.3.36
Fusing Unit Cooling Fan Motor
1. Remove the Upper Rear Cover.
See P.49
2. Remove the Rear Cover.
See P.50
[2]
[3]
6.3.37
Toner Suction Fan Motor
1. Remove the Upper Rear Cover.
See P.49
2. Remove the Rear Cover.
See P.50
[2]
[3]
[1]
[4]
Confidential – for internal use only, do not distribute
3. Remove three wiring saddles [1] and
disconnect the connector (PJ33) [2].
[1]
4040F2C622DA
4. Remove two screws [3] and the Fus-
ing Unit Cooling Fan Motor [4].
[4]
[3]
4040F2C623DA
3. Remove two screws [1] and two wir-
ing saddles [2], disconnect the con-
nector [3], and remove the Toner
Suction Fan Motor [4].
[1]
4040F2C621DA
6. Other
85