Specifications - Yaesu FT-2980E Operating Manual

General
Frequency Range:
Channel Step:
Standard Repeater Shift:
Frequency Stability:
Modes of Emission:
Antenna Impedance:
Supply voltage:
Current Consumption (typical):
Operating Temperature Range:
Case Size (WxHxD):
Weight (Approx.):
Transmitter
Output Power:
Modulation Type:
Maximum Deviation:
Spurious Radiation:
Microphone Impedance:
Receiver
Circuit Type:
Ifs:
Sensitivity (for 12dB SINAD):
Selectivity (–6/–60dB):
IF Rejection:
Image Rejection:
Maximum AF Output:
Specifications subject to change without notice or obligation. Specifications
guaranteed only within Amateur band.
Frequency ranges will vary according to transceiver version; check with your
dealer.
Symbols placed on the equipment
Direct current
FT-2980R/E Operating Manual
Tx 136 - 174 MHz (Asian version)
144 - 148 MHz (USA version)
144 - 146 MHz (European version)
Rx 136 - 174 MHz
5/10/12.5/15/20/25/50/100 kHz
±600 kHz
Better than ±10 ppm
[–4 °F to +140 °F (–20 °C to +60 °C)]
F2D/F3E
50 Ohms, unbalanced
13.8 V DC ±15 %, negative ground
Rx: less than 0.7 A, less than 0.3 A (squelched)
Tx: 15 A (80 W) / 9 A (30 W) / 5 A (10 W) / 4 A (5 W)
–4° F to +140° F (–20° C to +60° C)
6.3" x 2" x 7.3" (160 x 50 x 185 mm) (w/o knobs)
4.2 lb (1.9 kg)
80 W / 30 W / 10 W / 5 W
Variable Reactance
±5 kHz (Wide)
±2.5 kHz (Narrow)
Better than –60 dB
2 k-Ohms
Double Conversion Superheterodyne
21.7 MHz & 450 kHz
Better than 0.4 µV
12 kHz/28 kHz (Wide)
9 kHz/22 kHz (Narrow)
Better than 70 dB
Better than 70 dB
3 W into 4 Ohms @10 % THD

Specifications

73